Information on this page is drawn from "Carpenter: Fixture to assist re-seating RMF pedestal head after modification" published by intel

NOTE: Request for permission pending.

Task

Reseating pedestal head is necessary when pedestals are shortened.

Exposure

Many times the RMF tile pedestals need to be shortened which requires cutting off part of the column and then resetting the head into the column resulting in forceful exertion and repetitive motion using a sledge hammer.

Intervention Process

This fixture was built to hold the pedestal column upside down on top of the pedestal
head. The hydraulic jack, located at the base of the fixture, is then activated pushing the head back into the pedestal column.. This eliminates all force or extreme repetition on the part of the worker.

Materials

Materials specific to the fixture design.

PDF Downloads

Carpenter: Fixture to assist re-seating RMF pedestal head after modification